Have any questions? Miley Zheng: 0086-13960285951 Melody Luo: 0086-13774873080 Vivian Li: 0086-18070269888
These three uses of the Twist valve tap
The metal hose of the shower head of the Twist valve tap should be kept in a natural stretch state, and it should not be coiled on the faucet when not in use. At the same time, when in use or not in use, be careful not to form a dead angle at the joint between the hose and the valve body, so as not to break or damage the hose.
2022-12-16
These two selection methods of Twist valve tap
Knock on the main body of the faucet to see if the sound is dull, and carefully observe whether the faucet interface is made of copper. If the sound is crisp when knocked, it may be made of stainless steel and other materials, of course it is worse.
2022-12-09
It is very important to understand the test book of Twist valve tap
The most flexible part of Twist valve tap is its handle. There are two kinds of common Twist valve tap spools, namely steel spool and ceramic spool. Both spools have their own advantages and disadvantages.
2022-12-02
What does valve fitment for syrup include
Valve fitment for syringe should mainly include: positioner, solenoid valve, air filter pressure reducer, position valve, reversing valve, valve position switch, etc. Different valves are equipped with different valve fitments for syrup, but it is generally inseparable from locators and reducers.
2022-11-25
Introduction of several components of valve fitment for syrup
We can often see all kinds of valves in life. Their existence and use not only provide a higher quality assurance for our life, but also play an extremely important role in many industrial production behaviors. So, how much do you know about valve fitment for syrup?
2022-11-18
Twist valve tap products should choose the right brand to focus on the valve core
Before buying Twist valve tap products, you should do a good job of purchasing strategies. Buying in regular shopping malls can avoid starting with inferior products. Then it is to look at the brand.
2022-11-11
Five points to pay attention to when purchasing Twist valve tap
Weight: You can't buy a Twist valve tap that is too light. Too light is mainly because the manufacturer hollows out the copper inside in order to reduce the cost. The tap looks large, and it is not heavy to hold, and it is easier to withstand hydraulic burst.
2022-11-07
Why does the quality Twist valve tap leak
The quality Twist valve tap is not tightly closed and dripping water may be because the gasket inside the quality Twist valve tap is damaged. There are plastic gaskets in the quality Twist valve tap, and the quality of the gaskets in different brands is also very different, but if this happens, just replace the gasket again!
2022-11-01
Twist valve tap products use good maintenance habits
Because the water contains a small amount of carbonate, it is easy to form scale on the metal surface and cause corrosion to the surface of the Twist valve tap products, so often use a soft cotton cloth or sponge with neutral soapy water to wipe the surface of the faucet, and then wipe it with a soft cloth dry surface.
2022-10-25
Several purchase methods of Twist valve tap
The surface chrome plating process of a good Twist valve tap is very particular, and it can usually be completed after several processes. The quality of the Twist valve tap depends on its brightness. The smoother and brighter the surface, the better the quality.
2022-10-19
Contact Us
Factory address：Western Side of NO.2 JinXin Road, Economic And Technological Development Zone, RuiJin, JiangXi, China
Office address：Room 802, Building 1#, MingGuang Garden, LiCheng, QuanZhou, FuJian Province, China
Message