Have any questions? Miley Zheng: 0086-13960285951 Melody Luo: 0086-13774873080 Vivian Li: 0086-18070269888
When installing VITOP tap, all kinds of impurities in the pipeline should be completely removed. Spool damage, jamming, clogging and leakage are avoided. At the same time, the surface should be cleaned so that no residues of building materials remain.
2022-07-29
There are different reasons for VITOP tap water leakage, which need to be repaired according to the specific reasons.
2022-07-22
What should I do if VITOP tap doesn't turn
If the VITOP tap is turned by hand, it is estimated that it cannot be turned. We need to use tools, wrenches or pliers to hold the VITOP tap screw, and then turn it. If necessary, you need to hit it with a hammer, maybe it will be able to twist.
2022-07-15
How to fix short vertical spiral tap products leak
We are familiar with Short vertical spiral tap products, and we need to use it in our daily life. With the development of the times, there are many types of Short vertical spiral tap products, and rotating Short vertical spiral tap products is one of them. Regarding the rotating Short vertical spiral tap products, everyone wants to know how to repair the water leakage. Today, let's follow the editor to learn about it.
2022-07-11
Causes of tooth chipping during tapping of Short vertical spiral tap products
Short vertical spiral tap products are the first choice for blind tapping of flexible, ductile long chip materials. Because, Short vertical spiral tap products are not suitable for large-size thread tapping. When tapping large-sized threads, especially high-tensile-strength materials, the torque required to use Short vertical spiral tap products will be very large, and the huge torque will cause the tap to chip or even break.
2022-07-04
The main points of quality Short vertical spiral tap tapping
The orifice of the threaded bottom hole on the quality Short vertical spiral tap workpiece should be chamfered, and both ends of the through-hole thread should be chamfered.
2022-06-28
Short vertical spiral tap products are broken how to take them out
How to take out Short vertical spiral tap products? I believe that many people do not know very well, let's take a look at it together.
2022-06-20
How to choose a supplier of quality Spout fitment for bag
Today, when the Internet is becoming more and more mature, the change in the procurement form of quality spout fitment for bag has allowed more and more suppliers to have a layer of online business opportunities.
2022-06-13
The reason for the tooth grabbing during the tapping process of quality Short vertical spiral tap
The quality Short vertical spiral tap is the first choice for blind tapping of flexible, ductile long-chipping materials. Because, the quality Short vertical spiral tap is not suitable for large-size thread tapping. When tapping large-sized threads, especially high-tensile-strength materials, the torque required to use the quality Short vertical spiral tap will be very large, and the huge torque will cause the tap to chip or even break.
2022-06-09
Straight groove tap and Short vertical spiral tap which one is better to use
Straight groove tap is a kind of tool that is often used on ordinary lathes. This kind of tool is also known by its name as a tool for tapping and threading. Today I will take a look at it in detail: straight groove tap Which is better, Short vertical spiral tap? Can straight flute taps tap blind holes?
2022-06-06
Contact Us
Factory address：Western Side of NO.2 JinXin Road, Economic And Technological Development Zone, RuiJin, JiangXi, China
Office address：Room 802, Building 1#, MingGuang Garden, LiCheng, QuanZhou, FuJian Province, China
Message